“They Failed”: VC Fred Wilson Gets BoomTown’s First Annual Someone-Had-to-Say-It Award

BoomTown has always enjoyed–although I have not always agreed with–the ruminations of Fred Wilson in his must-read blog, A VC.

Today, the New York venture investor–heard of Foursquare, Twitter?–penned one that was flatly on point, simply titled “Chasing Returns” about a potential crisis in start-up funding.

It was all due to a new class of investors too focused on chasing returns, noted Wilson, “and some of them do not understand what they are investing in.”

Rut-roh.

Perhaps dumb moneybags are not the greatest worry of our time–but dumber justifications of questionable success certainly should be, which Wilson also called out recently in an article in the New York Observer about the bubbly start-up scene there.

Said Wilson:

“It’s not all going great. You know, companies are failing. A couple of high-flying entrepreneurs came crashing to the ground recently. Justin Shaffer of Hot Potato and Sam Lessin of Drop.io–both of those companies essentially failed. Both of them ended up ’selling’ their businesses to Facebook, but those were really just–Facebook wanted to hire those people, and they wrapped it up in a ’sale.’ But those companies were unsuccessful. They failed. So there is failure out there–like, right in front of us. We can see it.”

Many quickly cried foul after Wilson’s remarks, but many more secretly shook their heads in agreement at the reality distortion field around entrepreneurs.

This has happened a lot lately in Silicon Valley, of course–as evidenced by a series of just-in-time saves of once high-flying start-ups (Slide being bought by Google comes to mind) sold as wins.

Indeed, painting failure as another form of success is one of the favorite and endearing canards of tech, showing an ability to bounce back from any negative and pivot into a new direction.

But most pivoting, as Loren Feldman of 1938 Media recently pointed out, is just another word for covering up misdirection.

Perhaps misdirection–as it should be in any world that thrives on innovation and entrepreneurial instincts–is all well and good, but it is only that way as long as it is identified as such when it occurs.

So, good for Wilson for truth-in-labeling when it comes to start-ups, investing and chasing returns these days.

How to use Mac TS converter to convert TS to MP4, MOV, etc on Mac OS X

What is TS?
Transport stream(TS, TP, MPEG-TS, or M2T) is a communications protocol for audio, video, and data which is specified in MPEG-2 Part 1, Systems (ISO/IEC standard 13818-1). Its design goal is to allow multiplexing of digital video and audio and to synchronize the output. Transport stream offers features for error correction for transportation over unreliable media, and is used in broadcast applications such as DVB and ATSC. It is contrasted with program stream, designed for more reliable media such as DVDs.
TS format is a container format that encapsulates pocketsize elementary streams and other data.
Important elements of a transport stream: Packet, PID, Programs, Program Specific Information (PSI) , 1 PAT , PMT , PCR , Null packets

How to play TS files on Mac?
You need media player to play TS files on Mac OS X:
VLC media player is a highly portable multimedia player for various audio and video formats (MPEG-1, MPEG-2, MPEG-4, DivX, mp3, ogg, ...) as well as DVDs, VCDs, and various streaming protocols. It can also be used as a server to stream in unicast or multicast in IPv4 or IPv6 on a high-bandwidth network. It supports Mac, linux, Windows.
How to convert TS to MP4, AVI,MOV, etc on Mac?
You need a video converter for Mac to convert TS to MP4, AVI, MOV, etc on Mac. Then you can put them on iPod, iPhone, PSP, Xbox 360, iMove, other potable players.
Step 1: Download TS Video Converter for Mac:
We recommend you Aiseesoft Video Converter for Mac which can convert TS to MP4, Convert TS to AVI perfectly. This Mac TS Video Converter also can extract audio from TS and Convert to MP3, M4A, etc. Compared with other video converters, this TS video converter for Mac provides you with better output quality, more advanced functions and higher conversion speed. You can download free trial Version here: for Mac intel users, for Mac PowerPC users. Then install and run this program. The trial version should be fully functional for what you want to do.
Step 2: Load the TS files you want to convert



Click the "Add File" button to browse your computer hard disc and add the .TS files you want to convert to the program.
Step 3: Output Settings
After you added TS files, you can select an output format for each video file and specify a directory on your computer to save the output files.
The TS Converter for Mac supports comprehensive video formats including AVI, MPEG, WMV, MP4, XviD, 3GP, FLV, etc.
If you don't know what formats your device supports, you can just select the format according to the device name. Of course, if you don't want to use the default video and audio encoding settings, just click the "Settings" button to customize these settings.



Step 4: Edit your TS files
This TS Video Converter for Mac set video brightness, contrast, saturation, crop video, trim video/audio and even merge multiple files into one file.

Step 5: Start the conversion
Click the Convert button to start conversion and then you can just go out for a walk or take a nap, and the conversion may have been finished when you come back: )

Modifications of transport stream specification for random-access media (M2TS)
Transport Stream was designed for tape and broadcast, but it required modifications for usage with random-access media devices like new generation of digital camcorders that record onto DVD disks, hard drives or solid-state memory cards.
Random-access based systems may save data packets into a temporary buffer if a storage device is not ready, for example on device startup. Packets are written out of order, and to keep track of them, a 4-byte timecode (TC) is added to standard 188-byte packets. The result is a 192-byte packet. This is what is informally called M2TS stream. Sony calls it "BDAV MPEG-2 transport stream". JVC calls it TOD (possibly an abbreviation for "Transport stream on media") when used in HDD-based camcorders like GZ-HD7.[9] M2TS transport stream is also used for AVCHD video files, which often have MTS extension.

Shunned Profiling Technology on the Verge of Comeback

One of the most potentially intrusive technologies for profiling and targeting Internet users with ads is on the verge of a comeback, two years after an outcry by privacy advocates in the U.S. and Britain appeared to kill it.

The technology, known as “deep packet inspection,” is capable of reading and analyzing the “packets” of data traveling across the Internet. It can be far more powerful than “cookies” and other techniques commonly used to track people online because it can be used to monitor all online activity, not just Web browsing. Spy agencies use the technology for surveillance.

Now, two U.S. companies, Kindsight Inc. and Phorm Inc., are pitching deep packet inspection services as a way for Internet service providers to claim a share of the lucrative online ad market.

Read the rest of this post on the original site

How to Put Photos on a PSP

What you need?
1. A PSP
2. A computer
3. A PSP to computer cord
4. Photos you want on your PSP

Step1, On your computer you will need to find the pictures that you want on your PSP.
Step2, You will need to create a folder on your desktop called PHOTO all in capital letters. Then, drag and drop the picture(s) you want on your PSP into this folder.
Step3, You will need to plug your PSP into the computer using the PSP to computer cord. Then, on your PSP go under the settings menu, and select the option that says USB connection. You should now be in USB mode on your PSP. .Now that your PSP is in USB mode, the computer should recognize it and open an options menu.
Step4, Your computer is displaying an options menu, select the option that says open folder to view files. Now, your computer should be displaying the folders on your PSP.
Step5, Open the folder that says PSP. Now, your computer should be displaying the folders inside of the folder named PSP.
Step6, Drag and drop the folder named PHOTO - the one with your picture(s) -into the folder named PSP, the one you are viewing. You're done; you've found out how to put pictures on your PSP. Now, go show your picture(s) off to friends, family, and whom ever you want.

Recommended Products For you:
DVD to PSP Converter for Windows
Aiseesoft DVD to PSP Converter for Windows is a professional application that is designed to convert DVD movie to PSP on PC.
PSP Movie Converter for Windows
Aiseesoft PSP Movie Converter is a professional video to PSP converter for Windows that can convert all sorts of video formats to PSP video on PC.

Angry Birds Versus Evil Pigs

There’s not much more to say than the headline above.

Except to note that this spoof of popular smartphone app characters at war–in this case, the Angry Birds and Evil Pigs–from an Israeli comedy show on television is very, very funny.

How to Copy DVD, Rip DVD, Convert Video on Mac

Many friends want to share their home-make DVDs and their DVD movies with others and also they always feel difficult to do that. Today I will share you a really easy way to Copy DVD to another DVD disc, DVD image ISO, or a DVD folder. Also I will also introduce you how to rip DVD and convert videos on Mac.

Part 1: How to copy a DVD to another DVD disc/DVD image ISO/DVD folder on Mac
Step 1: DVD Copy for Mac.
To copy a DVD on Mac, you need a DVD Copy for Mac to help you. Aiseesoft DVD Copy for Mac is a good choice.

Step 2: Load Your Source
This excellent DVD copy for Mac allows you to load DVD folder and DVD image ISO.

Step 3: Choose Output Info
1. "Full Disc" or “Main Movie”
This DVD copy for Mac enables you to copy the full disc and also the main movie according to your need.

2. "Audio", "Subtitle" and "Volume" name
You can choose your output audio from the "Audio" drop-down list, such as "all audio"/ "None"/ or some audio the DVD provide.

Subtitle is always an important thing, you can choose your output subtitle in "Subtitle" drop-down list.

You can also name your output volume's name

Step 4: Choose Your Target
You can copy your DVD to another DVD disc, DVD folder or DVD image ISO.

Tips:
1. You can also choose to copy the menus or not.
2. All the info you choose will be displayed on the "Info Box".

Part 2: How to rip DVD to video formats on Mac

Step 1: Download Aiseesoft DVD Ripper for Mac.

Step 2. Load DVD
Insert DVD into your DVD-ROM, run DVD Ripper for Mac, click "Load DVD", find the DVD folder of the movie you want to add from your DVD-ROM, and Click "Open".

Step 3. Set output format.
This best DVD ripper for Mac provides you output formats as many as you want. Just choose one from the drop down list "profile" according to your portable player.

Step 4: Conversion
You can just Click "Start" to begin your conversion.

Part 3: How to Convert Video files on Mac

Step 1: Download Aiseesoft Video Converter for Mac

Step 2: Load video
Easily click "Add File" to load your video that you want to convert.

Step 3: Choose output profile and settings
At the bottom of the interface there are a drop-download list named "profile". You can choose your output format here.

Tips:
1. Trim
If you want to pick up a part of the video to convert, please click "Trim" button and drag the "Start trim slider" to set the start time and "End trim slider" to set the end time. (a) You can also do that by clicking the "Start trim button" and "End trim button" (b). The third way you do that is set the exact Start/End time at the right of the pop-up window and click "OK".(c)

2. Crop
If you want to remove the black edges or you want to convert a certain area of your video, please click the "Crop" button. You can do this either by drag the frame around the movie (a) or set the crop value: "Top, Left, Bottom, Right".(b). Another way to do that is choose models from "Crop Mode"(c).
Aiseesoft Video Converter for Mac also allows you to chose the output aspect ratio above the crop pane, "Keep Original, full screen, 16:9 and 4:3" are available.

3. Effect
If you want to adjust the effect of your movie, please click the "Effect" button and a pop-up effect window will appear. It allows you to edit your movie’s effect including "Brightness, Contrast, Hue, Saturation and Volume".

Aiseesoft are making a promotion of “Buy One Get One” in order to express our gratitude and a long-term support during Thanksgiving season. The time is from 22^nd Nov to 28^th Nov. For more information, please click here: http://www.aiseesoft.com/special/thanksgiving2010.html.

Viral Video: Glee’s “Teenage Dream” Hits Big

The phenom of online music sales from the television show, “Glee,” continues with the digital chart-topping of its version of Katy Perry’s “Teenage Dream.”

Sung by cast newbie and red-hot singer Darren Criss, you will quickly see below in the video of the full performance from a recent episode why it is such a dreamy rendition.

How to Play all Video Files on Xbox 360 with Mac

This is a step by step guide on how to play any video file on your Xbox 360 from your Apple Mac computer.

How to play any video file on your Xbox 360 with your Mac – Only $29.00 Xbox Converter for Mac can clear up all your problem.

Here Is What You Will Need:

Xbox 360

Apple Computer - iMac, MacBook Pro, Apple Air, etc.

Xbox Converter for Mac

Step 1, Convert videos to mp4 format that compatible with Xbox 360.

Choose a small video to test for you first video, as encoding and conversion times can be lengthy if you choose a full movie. Try downloading a trailer for a movie in your favorite format that the Xbox 360 can't read. Like: AVI, and a lot of other weird formats.

Open up Xbox Converter for Mac. Xbox Converter for Mac is a phenomenal video conversion tool, it can convert video formats from one to another with perfect output quality and high conversion speed for Mac OS X users. It supports all popular video formats including flv, MPEG1, MPEG2, MP4, 3GP, 3G2, AVI, M2TS, MPEG TS/TP (for HD Video), M4V, etc.

At the bottom of Xbox Converter for Mac, it shows the format we can convert to. Choose MP4, which is the best for Xbox.

Choose output folder such as "Open Folder".

At the bottom right, click on the "Start" button. Then wait… , And the conversion speed is out of your surprise.

Step 2, connect your Mac and Xbox 360

Before you start configuring, open up Terminal (in Applications -> Utilities) and type "ifconfig en0" (zero, not a capital-o). You're looking for the bit that says "inet xxx.xxx.xxx.xxx". In my case, the number I get here is 192.168.2.1 Second, note down the IP address of your wireless router, which in my case is 192.168.0.1

On your Mac

• 1. Connect your Mac to your wireless internet connection
• 2. Connect your Xbox 360 to your Mac via Ethernet
• 3. In System Preferences -> Sharing, enable Internet Sharing between your Airport and Ethernet connection

On your Xbox 360

• 1. Start up your Xbox and navigate to the Network settings menu
• 2. Under IP address, enter the number you got from the "ifconfig en0" command earlier on, but with the final number one place higher. In my case, I take the 192.168.2.1, and input 192.168.2.2 in the IP address box on my Xbox 360.
• 3. Under subnet, input 255.255.255.0
• 4. Under router/gateway, enter the number you got earlier from the "ifconfig en0" command. In my case, that's "192.168.2.1"
• 5. Move onto DNS. Enter the IP address of your wireless router (in my case, "192.168.0.1") in both the primary and secondary IP address fields
• 6. Leave PPPoE and advanced settings blank (i.e. OFF and Automatic)
• 7. You should now be able to connect to Xbox Live via your internet sharing Mac

Step 3, Play Video File on Xbox 360:

First, on your Mac, open up your new file in VLC and in QuickTime. Make sure it can play in both (Not necessarily at the same time). If you have done that, now it is time to move to your 360. Follow these instructions:

Turn on your Xbox 360

Navigate over to the "Media Tab", and select the "Videos" option.

Note: Since the Xbox 360 Dashboard update of about 6 months ago, once you click on"Videos" it will just show you all of the videos on your Xbox 360 hard drive. So presses "X" to change the current source. Then browse down to your Apple / Mac computer. Mine is an iMac.

Click on the "Movies Folder". That is where you should have saved the file there earlier.

Now browse through your video files and select your sweet, newly converted video file, and play it!

All the operations is just like pie. So you can watch any your favorite video on your Xbox 36o from your Mac easily Now. Watch and Enjoy it!

More “Tron: Legacy”

This one is going to have the geeks packing the seats–it has all kinds of tech doodads, a duel to the death inside a videogame and cool motorcycle thingamabobs.

In other words, another trailer for the eagerly anticipated movie sequel to “Tron,” called “Tron: Legacy.”

It opens December 17.

How to Rip DVD, Convert Video to iPhone, backup iPhone info, make iPhone Ringone For Windows/Mac

Recently, iPhone has became a really important part of our life. People use it to make a phone call, enjoy music and movies/videos, and play games. Today I will share you a really nice software pack, which can convert DVD and video to iPhone video/audio formats, backup iPhone info on your computer, and make iPhone ringtone easily.

What you need is just this nice Convert DVD Video to iPhone software

Part 1: How to convert DVD movies to iPhone
Use Aiseesoft DVD to iPhone Converter.

Step 1: Load DVD
Put your DVD in your DVD Drive and click “Load DVD” button

Step 2: Choose output profile and Settings
You can choose your output profile in the drop-list when you click profile list.
You can also adjust your settings, such as Resolution, Bitrate, so on.

Step 3: Edit Video
You can do “Trim”, “Crop”, “Merge into one file”and other video editing functions to make your video more enjoyable.

Click “Start” to begin you conversion. After few mins you can enjoy your DVD movies on your iPhone.

Part 2: How to convert videos to iPhone with iPhone Movie Converter

Step 1: Add file
Click “Add File” button to add your video you want to put on your iPhone.

Step 2: Choose output profile and settings
You can choose your output profile in the drop-list when you click profile list.
You can also adjust your settings, such as Resolution, Bitrate and Encoder and so on.

Step 3: Edit Video
You can do “Trim”, “Crop”, “Merge into one file”and other video editing functions to make your video more enjoyable.

Click “Start” to begin you conversion. After few mins you can enjoy your videos on your iPhone.

Part 3: How to transfer songs and vdieos from iPhone to computer, from computer to iPhone and from iPhone to iPhone.

Step 1: Click iPhone Transfer
Click “Computer to iPhone”(1) button, it will allow you to transfer songs and videos from your computer to iPhone easily.
Click “iPhone to Computer”(2) button, it will allow you to backup your songs and videos from iPhone to your computer.
Click “iPhone to iPhone”(3) button, it will allow you to transfer songs and videos from one iPhone to another iPhone dirrectly.

Part 4: How to make your own iPhone ringtone

Step 1: Click iPhone Rigntone Maker and click “Browse” on the right side of "Input File" to import the file that you want to make ringtone from i.t

Step 2: Play it and listen the music to find the segment that you want to use it as ringtone. Then drag and click the start& end slider to set your wanted segment, or type the start & end time in the corresponding text box directly to get the exact segment. You also can pre-listen the converted audio before generate.

Step 3: Click “Browse” on the right side of "Local Output Folder" to choose the output destination.

Step 4: Check "Export to iPhone" option, the converted ringtone will be load to your iPhone directly.

Step 5: After all the settings are finished, click “Generate” to begin making your own iPhone ringtone.

For Mac users I recommend you Aiseesoft iPhone Software Pack for Mac

Using Aiseesoft iPhone Software Pack for Mac, you can convert any video/DVD to iPhone Mac, backup the audio, video files on iPod to Mac and import audio, video files or folders from Mac to your iPod without iTunes with the help of iPod Manager Mac, even make iPhone ringtone from AVI, MPEG, WMV, MP4, FLV, MKV, H.264/MPEG-4, DivX, XviD, MOV, RM, RMVB, MP3, WMA, AAC video and audio sources on Mac.

Ross Levinsohn Says Hello on His First Day at School of Hard Knocks, Oops, Yahoo

Ross Levinsohn officially starts at Yahoo today, although he has already been busy machinating and taking meetings since he was appointed North American head recently.

The former News Corp. exec replaces Hilary Schneider, and enters a tumultuous job running Yahoo’s key media and advertising sales businesses.

BoomTown has yet another primer for him today, but first let’s hear from Ross in his first blog post for the Silicon Valley Internet giant, titled “Once in a lifetime opportunity”:

Today marks my first official day at Yahoo! and I am thrilled to be joining one of the world’s preeminent technology companies that operates the largest digital media, content, and communications business in the world. I am extremely passionate about digital media and as a longtime user and fan of Yahoo! I couldn’t be more excited to be part of this incredible company and amongst some of the best and brightest in the industry.

I truly believe that Yahoo! is one of the most compelling and dominant companies in the world. Having run digital companies big and small over the past 15 years, the task of building audience, engagement and revenue is no small feat. I feel fortunate to now be part of a company that not only has one or two category leaders, but operates the number one or two site in more than a dozen verticals. This is a feat unmatched in the industry, and provides unparalleled upside opportunities for all of us.

As I begin my own Yahoo! journey, I think it’s important to commit to each of you that one of my main goals is for the Americas team to be open and utterly approachable: I want to talk with you and understand your views of Yahoo! in order to make sure the Americas organization continues to win. I welcome all new ideas and I will act quickly to implement the right ideas for our business. Collectively we will continue to foster success for the company, each other, our partners and our customers with one goal–to deliver the absolute best consumer experience for Yahoo! users.

I’ve been fortunate to have had the opportunity to be at the forefront of the digital media revolution. These types of opportunities rarely happen in one’s career. As I start at Yahoo! today, I feel like a new chapter has begun. Having the opportunity to work here and help shape the next phase of Yahoo! is easily the greatest opportunity of all in my career.

I came to Yahoo! to win and I’m ready to get started.

Ross Levinsohn, EVP, Americas Region

How to Rip DVDs to iPod, iPhone, etc. with Handbrake

Do you want to watch your DVDs on your iPod, iPhone or Apple TV? Here's a guide which explains how to use an excellent software - Handbrake to rip DVD's into MPEG-4 video files.

Requirements:
1. VLC player (Handbrake 0.9.3 and higher)
2. iTunes 6.0.1 or later
3. QuickTime 7.0.3 or later
4. 500 MHz processor or better with at least 16MB of video RAM
Step 1: Download Handbrake
Download Handbrake from here and install it. Handbrake is free. If you already have Handbrake installed, please check to see if your version is out of date. Several new improvements have been made recently to the program, specifically for the iPod and iPhone.



Step 2. Insert DVD
Grab a video DVD and put it into your computer. Handbrake can only convert standard video DVD's that you would normally play in a DVD player. If you have a DVD-ROM with video files saved on it as individual files (AVI, MPG, WMV, MOV, etc), Handbrake will NOT be able to convert these files. Handbrake only wants standard video DVD's.
Depending on your computer's preferences, the DVD Player application might automatically open. If it does, just quit it. Only one application should be accessing the DVD at a time.
Launch Handbrake. A screen asking you to select a DVD will appear. Select the DVD you've inserted into your computer and press the Open button.



Step 3: Download VLC player
What version of Handbrake are you using? As of version 0.9.3, Handbrake will no longer natively rip DVDs. Weird right? I wonder if they were getting some pressure from the movie industry. But don't give up on Handbrake just yet. You can still use Handbrake 0.9.3 to rip DVDs, you just need to install VLC on your machine first.
If you see the VLC screen like the one shown below, then you need to download and install VLC.



VLC Download Page:
http://www.videolan.org/vlc/

The VLC media player is a highly portable multimedia player for various audio and video formats (MPEG-1, MPEG-2, MPEG-4, DivX, mp3, ogg, etc.) as well as DVDs, VCDs, and various streaming protocols. It can also be used as a server to stream in unicast or multicast in IPv4 or IPv6 on a high-bandwidth network. Handbrake now uses some components of the VLC player and it must be installed if you want Handbrake to read DVDs.
The VLC media player is a highly portable multimedia player for various audio and video formats (MPEG-1, MPEG-2, MPEG-4, DivX, mp3, ogg, etc.) as well as DVDs, VCDs, and various streaming protocols. It can also be used as a server to stream in unicast or multicast in IPv4 or IPv6 on a high-bandwidth network. Handbrake now uses some components of the VLC player and it must be installed if you want Handbrake to read DVDs.
After you download VLC, you need to install it on Mac:
VLC for Mac OS X is distributed as a disk image. Download the .dmg file, open it, and copy VLC to your hard drive (for instance the /Applications folder). Open VLC by double-clicking on it.

Step 4: Source Settings
Handbrake will now scan your DVD. This makes take up to a minute or two depending on the contents of the DVD and the speed of your optical drive.



Title: By default, Handbrake will select the longest title in the list. However, this may not be the content you want.
Movies: If you are ripping a movie, the longest title is usually the main feature.
TV Shows: If you are ripping a DVD containing TV shows, you should see a list of several titles all about the same length. The shorter titles on the DVD are usually the video backgrounds used in the DVD menu screens and DVD extras like movie trailers. Unless you are a graphic artist, you probably don't want these tracks.
The shorter titles on the DVD are usually the video backgrounds used in the DVD menu screens and DVD extras like movie trailers. Unless you are a graphic artist, you probably don't want these tracks.



If you only want to rip one title but aren't sure which one, you can click on the Picture Settings button (bottom right of the Handbrake interface) and manually step through several frames of the title to see what it looks like.
NOTE: Sometimes Handbrake is unable to see every track on a DVD. We've noticed issues with very old DVD's from the mid-1990s (before the days of fancy menus and Bonus features) and some newer DVD's like Stealth. There are different techniques and methods to authoring DVD's Sometimes the tracks get nested in weird ways that prevents Handbrake from seeing them. Other DVD ripping applications like Mac The Ripper and OSex might be able to see these tracks. Look for the longest track. That is probably the main feature.

Step 5: Destination Settings
The Destination section has 3 settings you can modify: file format, codec and file destination.
File Destination: You can name your file and choose its destination using this box. Try to pick a location that has sufficient disk space to store the ripped file. On average, you need about 1 GB per full length movie.



Step 6: Select A Preset
Handbrake has a variety of handy DVD ripping presets for iPod, iPhone, Apple TV, Xbox, Sony PSP and many more. Just select a preset and Handbrake will automatically fill in all the settings for you.



If you plan on watching this DVD on your iPod, iPhone or even Apple TV, we suggest you select iPod High-Rez and drop the average bitrate to 900 kbps. This will give you a nice high quality file that will work on both big (HDTVs) and small screens (iPod/iPhone) and won't take up a ton of hard drive space.



Step 7: Picture Settings
Click on the Picture Settings button to launch a separate window. The only thing you really want to do here is to compensate for interlaced or grainy, compressed looking video. Handbrake will have adjusted everything here for you based on the preset you selected.
Sometimes video files will have horizontal lines in them. This is called interlacing. To get rid of interlacing, try turning on the Deinterlace option and select "Fast." The image below is animated and will toggle between when the deinterlace option is turned on or off. You can really see the difference around the edge of the flipper.


Denoise will help get rid of graininess and Deblock will help clean up blocky or compressed looking video. Experiment and try to make your video clip look the best possible.
NOTE: Your iPod really only wants video files that are 320 pixels wide by 240 wide. If you don't plan on watching this ripped DVD on anything else, you can mess around with the settings. Turn on the "Keep aspect ratio button" and decrease the Width until it says 320. Handbrake will auto-adjust the height to match the width. If your video source is 3:4 (full-screen), the height will be 240. For wide-screen content, the height will be a lower number. This is fine and isn't something to worry about.
But if you plan on watching this video on your TV with an Apple TV or an iPod Video dock, then you should keep the video size big. If you don't have the money for an Apple TV, there's this amazing iPod video dock called the Keyspan TuneView. If you want to hook your iPod Video up to your TV, you should check out the TuneView.



Step 8: Rip
Finally! Click on the Rip button and stand back. The encoding time will depend on several variables including: the duration of the video file, the speed of your computer, what other activity your computer is currently doing, the codec you selected (H264 or MP4) and if you decided to do a 2-pass encoding or not.



Handbrake will attempt to provide you with an ETA. The time will increase if you Pause the encode or do anything that will hog the processor like start a 3D render in Maya. We suggest you do your DVD ripping overnight or at a time when you don't need to use your computer.
Handbrake will attempt to provide you with an ETA. The time will increase if you Pause the encode or do anything that will hog the processor like start a 3D render in Maya. We suggest you do your DVD ripping overnight or at a time when you don't need to use your computer.



Step 9: Import Into iTunes
Connect your iPod Video or iPhone to your computer using the cable it came with and open iTunes (Applications > iTunes).
Drag and drop the video file into your iTunes library, or select Add to Library... from the File menu.
Make sure the video file you just added to iTunes is in a Playlist that will get synced to your device.
Select "Sync"
The sync may take a few minutes. Once the import completed, you could find the file which is ripped by Handbrake on your iPod or iPhone.

“The Kaboom of Doom” (In 3-D, Of Course)

Here’s a kid’s film that BoomTown–who is force-marched to see these until approximately 2018–is actually looking forward to: The sequel to the delightful animated movie “Kung Fu Panda.”

This one, as everything in Hollywood must be these days, is in 3-D and subtitled “The Kaboom of Doom.”

How to download free youtube, yahoo, google, stream video for free

This step-by-step guide will show you how to download video from YouTube, Google Video, Yahoo and other video download website. Videos come from those websites are streaming videos. You need special software to capture steaming videos. Today we take YouTube video for example, write a guide about how to download streaming video to computer for free. This guide provides two methods:
1. with free online flv converter;
2. with firefox
This guide is also fit for other video websites as follow video list:
http://www.aiseesoft.com/article/free-download-video-list.html
3. How to transfer the downloaded youtube video to iPod PSP Zune iPhone Cell Phone and other MP3/MP4 player?

1. With free online flv converter
Step1. Open this website: http://vixy.net/. It's a free online FLV converter.
Step2. Then go to YouTube http://www.youtube.com and find a video that you love. Copy the URL that in the Red box. Like this format: http://www.youtube.com/watch?v=sdUUx5FdySs



Step3. Paste your video file URL to the input box (figure as follow), choose the right format you want. If you want to edit the video, AVI is a good choice. And MP4 is fit for iPod, PSP, Zune, Apple TV and other MP4 players. This online converter also can rip audio to MP3. Then wait for the conversion.



Step4. When the conversion finished, we got the download link of the output video. Click the download link to download the video and save in your computer (remember where you save it in). Done.

2. With Firefox
If you have Firefox browser, you can follow these steps.
Step1. Install the videodownloader extension. This is a free plug-in for Firefox. It enables you capture streaming video from website. Here is the Download link:
https://addons.mozilla.org/firefox/2390
Step2. After installing videodownloader, restart Firefox. In the bottom right, you'll see a little box. Go to the video you want to download, double click that little box, and select download link. Then you could download the streaming video you want. (Note, you have to rename the file extension from “html” to “flv”)





You have to rename the file extension from “html” to “flv” when you save the link. (Make sure your compute is show file extension)

3. How to transfer youtube video to iPod PSP Zune Phone and other MP3/MP4 player?
For iPod: if your download youtube video already is MP4 video, drag it to your iTunes library (or click iTunes "file" -> "add files to library"), plug in your iPod to computer, and then select your iPod device on the left panel of iTunes, click "Movies" tab, check the videos you want to sync and click "Apply", done.
If your downloaded YouTube video is not MP4 video, you have to convert it to iPod format at first, take a look at this free iPod converter, it embeds an iPod manager that can convert and transfer YouTube video to iPod directly without iTunes, here is a step by step guide about it:
http://www.aiseesoft.com/article/ipod-movie-converter.html
For PSP: PSP is the same as iPod, they are both support MP4 video, if you have converted the YouTube video to MP4 with above method, you can copy the MP4 video directly to the "Video" folder in your memory stick (if there is no "Video" folder in your memory stick, you can create by yourself). If your downloaded YouTube video is not MP4 video, you have to convert it to PSP format at first, take a look at this PSP Movie converter, it t can convert and transfer YouTube video to psp directly, fully support all firmware version of PSP, here is a step by step guide about it:
http://www.aiseesoft.com/article/psp-movie-converter.html
For Zune: Zune can play WMV video, if you have converted your download YouTube video to zune format, then open the Zune software, drag the wmv video to your Zune software, plug in your Zune to computer, and then Zune software should detect your Zune automatically, then click "Start to sync", the video will be transfered to Zune player.
If your downloaded YouTube video is not WMV video, you have to convert it to Zune format, take a look at this free Zune converter, it can convert video to Zune format, it can also convert YouTube video to MP3 for other player, here is a step by step guide about it:
http://www.aiseesoft.com/article/zune-movie-converter.html
For cell phone: Cell phone accepts 3GP video and MP4 video, just convert your downloaded YouTube video to the proper format, connect your cell phone to computer, and then copy the videos to your cell phone memory card. If you don't know how to convert video, take a look at this step by step guide:
http://www.aiseesoft.com/article/total-video-converter.html

More Yahoo Deal Scenarios Keep the Goat Rodeo Going Strong!

If wishes were horses, as the old proverb goes, all beggars would ride.

Or, in the case of the incessant corporate drama around Yahoo: If wishes were deals, all bankers would get big fat fees.

Even BoomTown has been harboring a big wish that there were some new scenario–instead of the same retreads that have been bandied about for more than a month–that was at least possible.

But because making up scenarios about the fate of Yahoo is all fun and games, it goes on and on and on.

Today’s latest intrigue is from Reuters, which reports that the Alibaba Group’s Jack Ma is considering entreaties by moneybags private equity folks to give him the many billions of dollars needed to buy back Yahoo’s 40 percent stake in the Chinese Internet giant and perhaps even participate in a takeover of Yahoo itself.

As has been reported here and in many places many times already, private equity and other investor interest has centered for a while on working with Ma to unlock critical financial value for anyone interested in doing any kind of buyout of Yahoo.

And, as it turns out, Ma has long been explicit about wanting to rid himself of Yahoo and to take back control of Alibaba completely.

There’s no doubt the government of China would also look kindly on that result too, many sources say, given the huge size of the vexing foreign ownership of one of the country’s brightest Internet stars.

But, as most also know, wishing–and even offering a giant pile of money–doesn’t make it so, unless Ma can convince Yahoo to sell to him.

And, of course, he also does not have to do anything either, since Yahoo management has little say over his actions at Alibaba, in spite of the large stake Yahoo holds.

As you can see, you can spin these ideas all day long, which is what bankers apparently get paid so much for.

Luckily, I will do it for free.

You could, for example, add Microsoft into the Yahoo mix once again. Would it engage, in order to get the search business in China from Alibaba? Or to finally unload its pricey MSN unit?

And what of News Corp., with its extensive ties in Asia and interest in trading its weak digital properties, such as Myspace, for something better? Wasn’t CEO Rupert Murdoch sniffing around before?

There is also a renewed scenario for Demand Media to become involved.

Of course, let’s not leave out the old faithful plots about how tiny AOL, with its high-Q-quotient CEO Tim Armstrong, could still be a contender.

Just for fun, I will add another interesting idea I recently heard: Comcast. Could the cable and now media giant swoop in at some point and pick up a lot of digital assets it might need going forward?

Don’t forget Disney either–the Hollywood entertainment giant, which has a key interest in moving into the digital space even more boldly.

On consolation: Google is probably out, having been burned before, because of all the antitrust issue inherent in any hookup with Yahoo.

Of course, it will not be a party until Twitter gets here, with its date Zynga.

Finally: Where, oh, where is the holy union of Facebook CEO Mark Zuckerberg and Apple CEO Steve Jobs when you need them to knock this corporate drama into the stratosphere?

Until it is all sorted out for real, here is a reprint of some of the many similar scenarios I cooked up way back in late September–most of which were investor fantasies, but now are being taken more seriously–in a post titled “Could AOL Merge With Yahoo? Could News Corp. Make a Play? Takeover 2.0 With a Little Help From China’s Alibaba?”

Enjoy–although, as you will see, it’s the same scenarios floated then as now:

Today, as news of the departure of Yahoo’s U.S. head Hilary Schneider and two other top execs got around Wall Street, investors and dealmakers were actually thinking of things other than executive turmoil.

As in: Does the uncertainty, along with a naggingly lackluster stock price and weak growth, create pressure on its CEO Carol Bartz and its board to do something dramatic?

In addition, does the messy public situation even provide an opportunity to put Yahoo into play, despite its market cap of $19 billion?

These and many more are the scenarios being debated in boardrooms of big media and Internet companies today, as well as at private equity firms, investment banks and even in Asia.

That’s because many are focusing on Yahoo’s Asian investments. Yahoo itself owns almost 35 percent of Yahoo Japan and a 40 percent stake in China’s Alibaba Group, assets that now make up–along with cash on hand–most of the company’s valuation.

Alibaba and Yahoo have recently gotten into an ugly public tussle over the Chinese firm’s desire to buy back the shares now, with Bartz holding out for more appreciation.

Now, she might have to do a deal with Alibaba, according to one theory, because a sale of its stake would give Yahoo’s stock a significant boost.

One problem: Alibaba CEO Jack Ma has made it known to anyone who will listen that he loathes Bartz personally, after a series of awkward encounters. That said, he has a close relationship with former Yahoo CEO and co-founder Jerry Yang, who is on both companies’ boards.

That puts Ma in an interesting position, according to another theory, because other U.S. companies with an interest in Yahoo might try to make a deal with him to do some kind of deal with Yahoo.

Most frequently mentioned by big investors in Yahoo: AOL and its CEO Tim Armstrong.

Armstrong, said sources, has not shied away from the idea of Yahoo acquiring AOL and installing him as CEO with Bartz as chairman. AOL’s valuation is just $2.65 billion.

Although AOL has also been trying to turn itself around and is in a much less powerful position than Yahoo, Wall Street likes Armstrong’s story for AOL as a modern-day media and media distribution company.

“At least he has a narrative that is believable,” said one big investor in both companies. “Bartz has no vision.”

Another plus for Armstrong: His friendly and Don Draper-smooth demeanor, in contrast to Bartz’s tough-talking and now too-often curse-laden patter.

And while, Armstrong has assembled an experienced staff. And he himself has deep online advertising sales experience, given his last job as head of U.S. sales at Google.

Also likely to be interested: News Corp. The reason is that its own digital efforts, especially at the MySpace social networking site, have gone sideways.

And there’s history: News Corp. tried to facilitate a merger of MySpace, MSN and Yahoo into a company codenamed “TrafficCo” at the time Microsoft was attempting a takeover of Yahoo.

It was supposed to be headed by former Microsoft exec and now Juniper Networks CEO Kevin Johnson, another possible Yahoo CEO candidate.

That plot did not pan out and News Corp. has been trying mightily to revive MySpace ever since. It certainly would trade it into Yahoo for some stake.

Another hook: Its digital head Jon Miller, who used to be CEO of AOL, almost was CEO of Yahoo, during that same takeover fight. But a noncompete agreement with Time Warner was enforced by CEO Jeff Bewkes at the time.

Both AOL and News Corp. could certainly make approaches to Ma or Yahoo Japan’s Masayoshi Son to agree to help them get back their Yahoo stakes.

Son was the one who made the move recently to switch out Yahoo search for Google in Japan.

And, by the way, Son was one of Yahoo’s earliest investors.

Confused? Well, it is certainly shaping up to be a lively Silicon Valley goat rodeo, as there are also all kinds of private equity companies with spreadsheets already figured if Yahoo shares decline enough.

And there are other ideas spinning on spins into Yahoo, such as Demand Media, which is prepping an IPO, and its perpetually enthusiastic CEO Richard Rosenblatt.

One unlikely player is Microsoft. The once hostile suitor is now a partner to Yahoo in search and online advertising.

Of course, the last and biggest question is what happens between Bartz and the board. While they seem to have backed her this far, she has not performed as she has promised and now seems to have gotten publicly grumpy about all the pressure to do so.

Will the directors, who proved themselves pretty ineffectual in the past, continue to support her? Or will they find some self-protecting way to ease her out?

Some directors are definitely unhappy, sources said, but no one seems to be in charge or particularly influential.

Which could mean even more confusion as Yahoo moves unsteadily forward.

How to Convert and Edit HD Video

Because of the widely using of HD Camcorder, now it is really convenient to record family parties and other things you are interested in. Nowadays, people would like to share their things with the rest of the world through Internet, such as youtube.com and other video websites.

This guide aims to show you how to convert and edit the video you recorded using your HD camcorder
What you need is a powerful HD Video Converter.

Step 1: Load Video
Click "Add File" to load the video that you want to convert to Aiseesoft MTS Converter.

Step 2: Choose Your Output Profile and Settings
From "Profile" drop-down list you can choose your output profile according to your need.
You can also click "setteing" adjust the settings of your output video, such as "video/audio encoder", "Video/audio Bitrate", "Channels", "Resolution" and so on..
Step 3: Video Editing
This powerful MTS Converter allows you to do many video editings.
1. Click "Effect" to make special effect for your movie.
You can adjust the "Brightness", "Contrast", "Saturation" and also you can use "deinterlacing" to improve you output effect.

2. Trim:
"Trim" function allows you to pick up any part of your video to convert. You can just convert a part of your video that you want.

3: Crop:
Cut off the black edges of the original movie video and watch in full screen on your iPod using the "Crop" function.

Step 4: Conversion
After you have done all the steps above you can click "Start" button to start your conversion.

Here I also recommend you some High Definition video converter, MTS Converter, TS Video Converter.

Another Video Ad Tech Buy: Undertone Snags Jambo Media

More consolidation in the video ad business: Ad network Undertone has bought Jambo Media, which runs both its own video ad network and a platform for companies that run their own.

I don’t have a price for the deal, but from the outside, it looks a lot like the one we saw last month, when Specific Media picked up BBE: A big ad network that doesn’t do much with video buys its way into that business.

A reminder that while video ads are booming, they’re still relatively small: The Interactive Advertising Bureau says marketers spent $627 million on video in the first half of this year. That’s up 31 percent from 2009, but it’s still just 5 percent of the Web ad pie.

And while Google says that YouTube is getting ads on videos seen 2 billion times per week, there is plenty of room in the market for players most people have never heard of like Tremor, YuMe and Brightroll. But we will see more consolidation as the industry grows up a bit.

In 2008, Undertone raised a reported $40 million via a funding round supplied by JMI Equity. I believe that some of that money went back out the door to some managers and early investors. But at the time Undertone said it would use the money for expansion so that’s presumably where some of the Jambo money came from.

How to play Videos on Xbox 360

How Can I Watch Videos on my Xbox 360?
There are two ways you can watch videos on your Xbox 360:



1. Download video from the Xbox Live Marketplace. Some of these videos are available for free while you may have to pay for others. Microsoft is in control of what videos are available through the Xbox Live Marketplace.



2. Stream videos from your Windows Media Center PC by using your Xbox 360 as a Media Center Extender. You are in control of what videos you want to watch, however there are restrictions on what kind of video you can playback. See below for more details.



Is there any way I can play my own videos WITHOUT a Media Center PC?.
No. Without a Windows XP Media Center PC, you can only play back the movies Microsoft offers in the Xbox Live Marketplace.

Do I need additional hardware/software to playback video on my Xbox 360?
Yes. You will either need the optional Xbox 360 Hard Drive to download/watch video from the Xbox Live Marketplace or you will need a PC with Microsoft Windows XP Media Center as your OS in order to stream video from your PC.



Does it support video streaming through Windows Media Connect?
No. There are video sharing capabilities built into Windows Media Connect, however, Microsoft has chosen to ONLY allow you to share Audio and Pictures through Windows Media Connect. You CANNOT stream videos through Windows Media Connect to your Xbox 360.



What kind of videos can I play using the Media Center Extender?
Microsoft Windows Media Video (WMV) 7, 8, & 9
- Maximum resolution of 1920x1080 (1080p) at 30 frames per second.
- Windows Media Audio Standard or Windows Media Audio Pro audio.
- WMV content may be Windows Media DRM-protected.
- Bitrates up to 8 Mbps.
WMV Image 1 & 2
- Maximum resolution of 800x600
MPEG-1
- MPEG-1 layer I and II audio.
MPEG-2, DVR-MS
- Maximum resolution of 1920x1080 (1080i).
- MPEG-1 layer I and II or AC-3 audio.
- Bitrates up to 19.2 Mbps.

Does it support avi? Divx? Xvid? Quicktime? H264?
No. The Media Center Extender in the Xbox 360 only supports playback of DVR-MS, MPEG-1, MPEG-2 and WMV video.

How can I watch these other (avi, divx, xvid, etc) videos on my Xbox 360?
You have to convert these videos into the video formats the Xbox 360 Media Center Extender can playback. We recommend you to use Aiseesoft Total Video Converter (for Mac OS, choose video converter for Mac ) to convert all popular video formats to xbox 360 video and audio files perfectly with just a few clicks.



Does the Xbox 360 support direct video streaming through Windows Sharing/Samba Shares?
No.

Can I watch DVDs through the Media Center Extender?
No, you can only watch DVDs by using the Xbox360's DVD drive.

Can I use a DVD Disc Changer through the Media Center Extender?
No. This functionality is not available in through the Xbox 360's Media Center Extender. You can only watch one DVD at a time by using the Xbox360's DVD drive.

Will My DVDs be available on the XBox 360?
"No. We did not implement the ability to remotely play back a DVD from a MCE to an XBox 360 Extender so it did not make sense to make My DVDs available. I certainly understand how cool it would be if you could put your MCE and full loaded DVD changer in a closest and use XBox 360's to watch your DVD collection from any room wirelessly but this is something that's going to have to wait until a future release." - Matt Goyer - MCE Program Manager

Can the Xbox 360 play video off the Xbox 360 Hard Drive?
Yes, but only video downloaded from the Xbox Live Marketplace or preloaded on the Xbox, not your own videos.
Can you hook up an external hard drive to the Xbox 360 and play videos off that?
No.

Recommended Products for you:
DVD to iPod Converter for Mac
It's a specially designed iPod conversion program to Convert DVD to iPod touch, iPod classic, iPod nano, convert DVD to iTunes on Leopard.
iPod Video Converter for Mac
It can convert MP4, MOV, 3GP, AVI, RM, MPEG, and FLV to iPod video with high output quality and various features.

The Not-Marc-and-Ben GP–a.k.a. John O’Farrell–At Andreessen Horowitz Speaks!

He’s not Andreessen and he’s not Horowitz, the pair of brand names of the high-profile Silicon Valley venture firm that just announced a new $650 million fund to add to their $300 million already at work.

But as quiet as John O’Farrell has been, he is the third general partner–and there are only three for now–of what seems to have turned into the hottest VC outfit of late.

The firm was launched in mid-2009 by Netscape Founder Marc Andreessen and his longtime business partner Ben Horowitz, and both have since made a series of splashy investments, written splashier blog posts and served on the splashiest–well, controversial–of boards.

O’Farrell just arrived to the party in late June.

But he had worked closely with Andreessen and Horowitz as an executive at Opsware through some decidedly rocky times, until they pulled off a remarkable recovery for the software company and sold it in 2007 to Hewlett-Packard for $1.6 billion.

The Irish-born O’Farrell–who has an interesting background in the cable business too–moved on to Silver Spring Networks, a smart-grid start-up. He assumed he would remain an operating exec.

But when he got the call from Andreessen and Horowitz, he said he could not resist the offer.

Here is O’Farrell talking about the firm in a video interview BoomTown did earlier this week.

How to put DVD movie into Windows Movie Maker and iMovie

If you want to edit a DVD movie with Windows Movie Maker or import several DVD clips into Mac iMovie to build a new DVD, but you get frustrated with the DVD format, this guide may help you solve the problem.

Before you get started, it will be helpful if you learn something about the DVD, WMM and iMovie.
General DVDs have CSS copy protection in MPEG-2 or VOB format.
(Windows) Windows Movie Maker supports WMV, AVI and MPG video files.
(Mac) iMovie accepts MOV and MPEG4 video files.

This guide includes two parts:
1. How to put DVD movie into Windows Movie Maker.
2. How to add DVD clips to Apple Mac iMovie .

Part1. How to put DVD movie into Windows Movie Maker

Step1. To put a DVD movie into Windows Movie Maker, you have to rip your DVD to WMV or AVI video first, and then you can load it into Windows Movie Maker. I’d prefer using Aiseesoft DVD Ripper to do this. You can get this program at: http://www.aiseesoft.com/dvd-ripper.html Then install and run it, put your DVD disc into your DVD drive, click “Load DVD” to locate your DVD file and import it, or load it by clicking “Load IFO File” to add DVD IFO file. (This DVD Ripper can rip copyright protected DVD movies, but you should remember that it’s illegal rip DVD for any business purposes)

Step2. Select output format and subtitle

After you load the DVD files, click the format drop-down list to select “WMV – Windows Media Video (*.wmv)” or “AVI – Audio Video Interleaved (*.avi)” as the output format. A regular DVD movie has multiple subtitles and audio tracks, and you can select the right one for you. If you just want a certain part of the DVD movie, you can click “trim” to cut the DVD movie. Just drag the timeline bar to set the start and end time, and then blue line will be the captured parts.



For advanced user, if you want to output higher quality video, click the “Settings” button to open the panel, here you can customize video bitrate, audio bitrate, resolution, framerate, etc. Higher bitrate will result in bigger file size.

Step 3. Start to convert

After the above steps, you just need to click “Start” and wait for the conversion to be finished. It provides the fastest conversion speed (>300%), completely support dual core CPU.

Step 4. Edit DVD with Windows Movie Maker (optional)

Run Windows Movie Maker, in the “Movie Task” bar, click “Add Video” to browse your computer and located the converted files, and then you can start to make personal movies.

Tips:Many users may wonder how they can convert Windows Movie Maker file (*.MSWMM) to other video format. Actually, A *.MSWMM file is not a video file. It is a project file of Movie Maker (more like a record file). You have to open this file in Windows Movie Maker and save the movie to your computer: Go to Movie Tasks bar > Finish Movie > Save to my computer. After that you will have a WMV file which can be converted to another video format or burned to DVD.

Part2. How to add DVD clips into Apple iMovie.

iMovie is similar to Windows Movie Maker, it supports MOV and MP4 video, so you just need to convert your DVD movie to the right format. Aiseesoft DVD Ripper has a Mac Version which supports both Mac OS Tiger and Leopard; you can download it for free from here: http://www.aiseesoft.com/dvd-ripper-for-mac.html
It is easy to use for the operation steps being similar to the windows version.



When the conversion is finished, you can run the iMovie, build a new project, and then drag the converted files to the work space to make personal files.
When the task is finished, In the Menu bar, Click "File" -> "Export" and save it as QuickTime video.

Download Aiseesoft DVD Ripper for Windows (put DVD into Windows Movie Maker)
Download Aiseesoft DVD Ripper for Mac (put DVD into Apple iMovie)